Home page

What are the maintenance methods of automobile inspection tools?

2023-04-08

Today's weather is really good, Xiaobian will lead you today to learn about the maintenance methods of car inspection tools

1. Ensure the drying of the environmental factors of the car inspection tool itself: the storage temperature is guaranteed to be between minus 10 degrees Celsius and 60 degrees Celsius; the humidity must be below 60%; the particles cannot exceed 2%.

2. Basic maintenance of automobile inspection tools: ensure that the exterior of the inspection tool simulation block is clean, and the positions of some latches, inspection pins, and bottom plates must be kept clean; the movable parts that need to be disassembled are placed in the corresponding positions.

3. The maintenance time can be divided into six months or once a year:

4. Check whether the bolt holes are worn, and replace them immediately if there is any problem;

5. Check if the precision slide is loose, and add lubricating oil;

6. Check whether the positioning reference is worn and rusted, and some are replaced or polished in time;

7. Check the marking scale and coating in time for wear and shedding.

What are the functions of the fixture

Introduction of welding fixture

More Information

Overall design of robot welding workstation

2023-08-15

What processes should be used for body welding？

2023-08-07